Constant Current 700mA LED RGB DMX Controller , RJ45 Socket DMX512 LED Controller

DMX512 decoder RGB constant current 700mA dipswitch addressing RJ45 socket

Model : DE8010

SUMMARIZE:

Thank you for using DMX512 Decoder series.It adopts the advanced micro-computer control technology, it converts the DMX-512/1990 standard digital signal adopted widely in international to the analog control signal.Output 1~3 Channels for option and each channel able to achieve 256 levels of brightness controlling,and also it can be used as the connector of PC digital-light controller and analog light modulator. It is mainly used for the controlling of buildings & lights applied LED.

Product Features:

◆Meets DMX512/1990,with RJ45 interface.

◆256-levels brightness,full-color with driver controls

◆Constant current 3 channels output,MAX 700MA per channel.Total power is 72W.

◆Can achieve asynchronous color changes effect under working with controller.

◆Cooperate with control system, can realize rich change effect.

◆Setting the DMX address freely

◆Modularizing and can be matched with different LED module neatly.

◆Custom-made for you as your demands.

Product Size :

Size:L160*W47*H24mm

Weight :200g

Product instructions:

Diagram: 

Note :

DMX-512 control signal connection

◆ DMX signal cable is made of twisted pair (line), DMX signal includes positive and negative end, in pressure welding DMX signal line plug should pay special attention to polarity. DMX512 controller input and output RJ45 interface: PIN1 is signal positive, PIN2 is signal negative, PIN7.8 is signal ground, please corresponding polarity connection.

◆ DMX5000 output and DE8010's transmission lines can't be over 300 meters.

◆ DMX5000 each interface can with not more than 170 pieces of DE8010. Eight output interface. Through the JBLED FLASH light making software and can with computer on line control. Realize infinite connect the DMX lights.

◆ When contacting 32 pieces of DE8010, DMX signal must add a signal amplifier RE2000 . Cascade can't more than 4 PCS.

◆ At the end of the connection, we should connect a DMX signal finalizer ( Put down the code switch no.10 of DE8010 dial).